Imported from ../bash-2.01.tar.gz.

tests/builtins.tests

@@ -0,0 +1,201 @@
+# tests for miscellaneous builtins not tested elsewhere
+set +p
+set +o posix
+
+ulimit -c 0 2>/dev/null
+
+# check that break breaks loops
+for i in a b c; do echo $i; break; echo bad-$i; done
+echo end-1
+for i in a b c; do echo $i; break 1; echo bad-$i; done
+echo end-2
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		break
+		echo bad-$i
+	done
+	echo end-$i
+done
+echo end-3
+
+# check that break breaks nested loops
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		break 2
+		echo bad-$i
+	done
+	echo end-$i
+done
+echo end
+
+# check that continue continues loops
+for i in a b c; do echo $i; continue; echo bad-$i ; done
+echo end-1
+for i in a b c; do echo $i; continue 1; echo bad-$i; done
+echo end-2
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		continue
+		echo bad-$i-$j
+	done
+	echo end-$i
+done
+echo end-3
+
+# check that continue breaks out of nested loops
+for i in a b c; do
+	for j in x y z; do
+		echo $i:$j
+		continue 2
+		echo bad-$i-$j
+	done
+	echo end-$i
+done
+echo end
+
+# check that `eval' re-evaluates arguments, but `builtin' and `command' do not
+AVAR='$BVAR'
+BVAR=foo
+
+echo $AVAR
+builtin echo $AVAR
+command echo $AVAR
+eval echo \$AVAR
+eval echo $AVAR
+
+# test out eval with a temp environment
+AVAR=bar eval echo \$AVAR
+BVAR=xxx eval echo $AVAR
+
+unset -v AVAR BVAR
+
+# test umask
+mask=$(umask)
+umask 022
+umask
+umask -S
+umask -S u=rwx,g=rwx,o=rx >/dev/null # 002
+umask
+umask -S
+umask 0
+umask -S
+umask ${mask}	# restore original mask
+
+# builtin/command without arguments should do nothing.  maybe someday they will
+builtin
+command
+
+# test enable
+enable -ps
+
+enable -aps ; enable -nps
+
+enable -n test
+case "$(type -t test)" in
+builtin)	echo oops -- enable -n test failed ;;
+*)	echo enable -n test worked ;;
+esac
+
+enable test
+case "$(type -t test)" in
+builtin)	echo enable test worked ;;
+*)	echo oops -- enable test failed ;;
+esac
+
+# test options to exec
+(exec -a specialname ${THIS_SH} -c 'echo $0' )
+# test `clean' environment.  if /bin/sh is bash, and the script version of
+# printenv is run, there will be variables in the environment that bash
+# sets on startup.
+(export FOO=BAR ; exec -c printenv ) | grep FOO
+(FOO=BAR exec -c printenv ) | grep FOO
+
+(export FOO=BAR ; exec printenv ) | grep FOO
+(FOO=BAR exec printenv ) | grep FOO
+
+# ok, forget everything about hashed commands
+hash -r
+hash
+
+# check out source/.
+
+AVAR=AVAR
+
+. ./source.sub1
+AVAR=foo . ./source.sub1
+
+. ./source.sub2
+echo $?
+
+set -- a b c
+. ./source.sub3
+
+# make sure source with arguments does not change the shell's positional
+# parameters, but that the sourced file sees the arguments as its
+# positional parameters
+echo "$@"
+. ./source.sub3 x y z
+echo "$@"
+
+# but if the sourced script sets the positional parameters explicitly, they
+# should be reflected in the calling shell's positional parameters.  this
+# also tests one of the shopt options that controls source using $PATH to
+# find the script
+echo "$@"
+shopt -u sourcepath
+. source.sub4
+echo "$@"
+
+# this is complicated when the sourced scripts gets its own positional
+# parameters from arguments to `.'
+set -- a b c
+echo "$@"
+. source.sub4 x y z
+echo "$@"
+
+# test out cd and $CDPATH
+${THIS_SH} ./builtins.sub1
+
+# in posix mode, assignment statements preceding special builtins are
+# reflected in the shell environment.  `.' and `eval' need special-case
+# code.
+set -o posix
+echo $AVAR
+AVAR=foo . ./source.sub1
+echo $AVAR
+
+AVAR=AVAR
+echo $AVAR
+AVAR=foo eval echo \$AVAR
+echo $AVAR
+
+AVAR=AVAR
+echo $AVAR
+AVAR=foo :
+echo $AVAR
+
+# test out kill -l.  bash versions prior to 2.01 did `kill -l num' wrong
+set +o posix
+sigone=$(kill -l | sed -n 's:^ 1) *\([^ 	]*\)[ 	].*$:\1:p')
+
+case "$(kill -l 1)" in
+${sigone/SIG/})	echo ok;;
+*)	echo oops -- kill -l failure;;
+esac
+
+# POSIX.2 says that exit statuses > 128 are mapped to signal names by
+# subtracting 128 so you can find out what signal killed a process
+case "$(kill -l $(( 128 + 1)) )" in
+${sigone/SIG/})	echo ok;;
+*)	echo oops -- kill -l 129 failure;;
+esac
+
+# out-of-range signal numbers should report the argument in the error
+# message, not 128 less than the argument
+kill -l 4096
+
+# kill -l NAME should return the signal number
+kill -l ${sigone/SIG/}